Can You Lay Pavers on Dirt? When It Works, How to Do It, and When It Fails
You can lay pavers on dirt for stepping stones and light garden paths, not patios. Test the soil, tamp it, set pavers on 1 inch of sand and keep water moving.
Category: Blog
Screeding Sand for Pavers: How to Strike a Perfect 1-Inch Bed
Screeding sand for pavers step by step: 1-inch rails, board technique, rail height from a string line, filling voids and the mistakes that cause dips.
How to Lay Stepping Stones in a Lawn So They Stay Flat and Mowable
How to lay stepping stones in a lawn: set 24 in apart, cut the sod, bed each stone on 1 in of sand and sit it flush so the mower rolls right over.
Paver Base Material: Which Stone to Buy (and What to Avoid)
Which paver base material to buy: crusher run, QP, road base, #57 open-graded stone, RCA or plastic panels, plus the materials that fail under pavers.
Paver Walkway Installation: Layout, Base, Edges and Steps
Paver walkway installation made simple: set a 36-48 in width, dig 7-9 in, slope it sideways, restrain both edges and add steps where the ground drops.
Paver Base: Layers, Depth, Compaction and Drainage Explained
How a paver base works: the 3 layers, how deep to dig for patios and driveways, compacting in lifts, geotextile on clay and building slope into the base.
Paver Installation: How to Build a Paver Patio That Stays Flat
Paver installation in 7 steps: dig 7-9 in, compact 4-6 in of gravel in lifts, screed 1 in of sand, lay, cut, restrain the edge and lock the joints.